Sensors - Hall Effects
Sensors - Hall Effects

High Reliability Hall Effect Sensor Non-Latching Output

The 65028 Hall Effect sensor detects the presence of a magnetic field and provides a switch output. It is packaged in a hermetically sealed three pin ceramic package and can be used in many harsh environments. An internal chopper stabilized amplifier eliminates input offset voltages normally associated with bipolar devices resulting in improved operating point stability. The output transistor will be “Switched ON” in the presence of a sufficiently strong South pole magnetic field facing the marked side of the package that meets or exceeds the operate point (BOP) of the sensor. The output will be “Switched OFF” as the South Pole magnetic field is decreased below the release point (BRP) of the sensor.
Product Family Hall Effect Sensors
Component Type Non-Latching
Operating Temperature -55°C to +200°C
Package 3 Pin Ceramic
Screening Commercial
Supply Current 50mA
Supply Voltage 3.5V to 24.0V
TYP BOP/BRP/BHYS 120Gauss/70Gauss/50Gauss


· Wide operating temperature range -55°C to +150°C
· High magnetic sensitivity
· Low current CMOS Technology
· Wide operating voltage range 3.5 to 20 V
· Chopper stabilized amplifier minimizes amplifier offset resulting in improved temperature stability


· Solid state switch
· Motor controls
· Speed sensing
· Angular position sensing
· Linear position sensing
· Current sensing


Models & Simulations

Similar Products

Product No. Package Screening Supply Current Supply Voltage TYP BOP/BRP/BHYS
65028-101 3 Pin Ceramic Screened 50mA 3.5V to 24.0V 120Gauss/70Gauss/50Gauss
65028-111 3 Pin Ceramic Vented Case Screened 50mA 3.5V to 24.0V 120Gauss/70Gauss/50Gauss

Contact us regarding
High Reliability Hall Effect Sensor Non-Latching Output